Doručení probíhá do 2 pracovních dnů; e-mail: info@briv.cz
LicheePi Zero V3S vývojová deska.
LicheePi Zero je kompaktní mini Cortex-A7 jádrová deska/vývojová deska pro začátečníky, kteří se chtějí učit pracovat s Linuxem nebo s komerčními vývojářskými produkty.
Lichee Pi Zero based on Allwinner V3S (ARM Cortex-A7 CPU, max 1.2GHz, 512MB DDR2 integrated), and it can boot from on board SPI Flash or TF card.（mainline currently only support tf card）
Zero has various low speed peripherals just like most MCU: GPIO,UART, SPI, I2C,ADC,PWM...
And it has other useful High Speed interfaces : OTG USB，MIPI CSI，EPHY，RGB LCD...
It also integrated codec: you can connect it to headphone or microphone directly.
LicheePi Zero specifications:
- Model: Lichee Pi Zero second generation
- SoC – Allwinner V3s ARM Cortex A7 processor @ up to 1.2 GHz with an ARM Mali-400 GPU, 512Mbit (64MB) DDR2 on-chip
- Storage – micro SD card slot, SPI flash (not 100% clear if it will be populated when shipped to backers)
- Display – FPC40 RGB Connector with support for 800×480 RGB LCD
- Audio – Audio codec
- USB – micro USB OTG port
- Misc – RGB LED
- Power Supply – 5V via micro USB port, or 5V/GND header
- Dimensions – 44.6×25.5mm
Expansion:
- 2x 15 headers with 2.54mm pitch, breadboard friendly with GPIOs, 2x UART, 1x SPI, 2x I2C,ADC, 1x PWM
- 2x 30 half-holes with 1.27mm pitch with OTG USB，MIPI CSI，EPHY，RGB LCD, more GPIOs
- RGB connector can take add-on boards for GPIO, LVDS, HDMI, VGA, etc...
Wiki: https://wiki.sipeed.com/en/lichee/zero.html
SW and docs: http://dl.sipeed.com/LICHEE/Zero/
More info: https://licheepizero.us/
